Carebara xynera
- Sci. Name
- Carebara xynera
- Tribe
- Crematogastrini
- Subfamily
- Myrmicinae
- Author
- Fisher, 2025
- Distribution
- Found in 5 countries
Introduction
Carebara xynera is a small myrmicine ant native to Central and East Africa. Major workers measure approximately 3-4mm in total length, with a distinctive feature: small tooth-like horns at the posterolateral corners of the head, which helps separate them from similar species. Minor workers are much smaller at approximately 1-2mm and have a characteristic oval head with strongly convex sides and a deeply concave posterior margin. The antennae have 11 segments. The species was originally described as Aneleus politus in 1914 but had to be renamed in 2025 after it was discovered the name was already in use for a different ant species. These ants inhabit rainforest, montane wet forest, and evergreen forest at elevations ranging from 110 to 2045 meters .
Quick Summary
- Difficulty: Unknown, this species has no documented captive breeding history
- Origin & Habitat: Central and East Africa (Cameroon, Central African Republic, Gabon, Kenya, Tanzania, Uganda, Rwanda). Found in rainforest, montane wet forest, and evergreen forest at elevations of 110-2045m [1][3]
- Colony Type: Unconfirmed, colony structure has not been documented in scientific literature
- Size & Growth:
- Queen: Undocumented, queen size has not been described
- Worker: Major workers: approximately 3-4mm, Minor workers: approximately 1-2mm, inferred from genus measurements [1]
- Colony: Unknown, no colony size data available
- Growth: Unknown, no development data exists for this species
- Development: Unknown, no direct data exists for this species (Development timeline has not been studied.)
- Antkeeping:
- Temperature: Unconfirmed, likely 24-28°C based on habitat. Start in this range and observe colony behavior.
- Humidity: Unconfirmed, likely high humidity given montane forest habitat. Keep substrate consistently moist but not waterlogged.
- Diapause: Unknown, no seasonal data available for this species
- Nesting: Likely prefers humid setups with soil or rotting wood. In captivity, a Y-tong or plaster nest with good moisture retention would likely work well.
- Behavior: Behavior is unstudied in captivity. Based on genus patterns, they are likely relatively peaceful and not aggressive. Minor workers are very small so escape prevention must be excellent, they can squeeze through standard test tube cotton. Foraging style is unknown but likely similar to other Carebara species, they probably scavenge and hunt small prey.
- Common Issues: no captive breeding history exists, this is an advanced species for experienced keepers willing to experiment, tiny minor workers mean standard cotton barrier setups may allow escapes, use liquid barrier tape instead, humidity requirements are unconfirmed, trial and error may be needed, colony growth rate is unknown, patience will be required, no documented diet acceptance, offer small live prey and sugar water and observe
Species Discovery and Naming
Carebara xynera has a complicated taxonomic history. It was first described in 1914 by Santschi as Carebara xynera based on specimens collected from Kenya's Kikuyu territory at the Blue Post Hotel. However, in 2025, Fisher discovered that the name was already in use, Solenopsis polita described by Smith in 1860. Since Santschi's name was a junior homonym, it had to be replaced. The new name 'xynera' was chosen arbitrarily and is treated as a noun in apposition. The species was moved from Aneleus to Oligomyrmex in 1966, and finally to Carebara in 2004 when Pheidologeton was synonymized under Carebara [2][1].
Identification and Distinguishing Features
Carebara xynera can be identified by several distinctive features. Major workers have small tooth-like horns or protuberances at the posterolateral corners of the head, this is the most reliable diagnostic feature. The head is about as long as wide, with a V-shaped emargination at the posterior margin. The propodeum has short, triangular, bluntly rounded spines. Minor workers have an oval head with strongly convex sides and a deeply concave posterior margin. Both castes have 11-segmented antennae. This species can be confused with Carebara nicotianae, but C. nicotianae major workers lack the horns at the posterolateral lobes, and minor workers have areolate sculpturing on the mesonotum and propodeum, while C. xynera minor workers are mostly smooth and shiny [1].
Natural Habitat and Distribution
This species is found across Central and East Africa, with confirmed records from Cameroon, Central African Republic, Gabon, Kenya, Tanzania, and Uganda. It was also recently recorded in Rwanda, representing the first record for that country [3]. The elevation range is extensive, from 110 meters to 2045 meters above sea level. They inhabit rainforest, montane wet forest, and evergreen forest environments. Specimens are collected from leaf-litter and soil using Winkler extractors and pitfall traps, standard methods for sampling tiny forest-floor ants [1].
Housing and Nesting in Captivity
Since there is no captive breeding history for this species, housing recommendations are estimates based on the natural habitat. Given that they are found in montane rainforest and evergreen forest, they likely require high humidity and stable temperatures. A Y-tong or plaster nest with good moisture retention would be appropriate. The nest should be kept humid but not waterlogged. Because minor workers are extremely small, escape prevention is critical, standard cotton barriers in test tubes may not be sufficient. Use liquid barrier tape on the edges of any setup. Provide an outworld for foraging that allows easy access to the nest but contains the tiny workers.
Feeding and Diet
The diet of Carebara xynera in the wild has not been documented, but related Carebara species are typically omnivorous, scavenging for small insects and tending aphids for honeydew. In captivity, you should offer small live prey such as fruit flies, pinhead crickets, and other tiny arthropods. Sugar sources like honey water or sugar water may be accepted. Start with small live prey and observe what the workers accept. Given the tiny size of minor workers, prey items should be appropriately small. Remove any uneaten prey after 24-48 hours to prevent mold.
Temperature and Seasonal Care
Temperature requirements are unconfirmed for this species. Based on the montane forest habitat, they likely prefer temperatures in the warm range but not extreme heat. A good starting point would be 24-28°C. The higher elevation populations may tolerate slightly cooler conditions. Use a heating cable on one side of the nest to create a temperature gradient, allowing the colony to self-regulate. Monitor colony behavior, if workers cluster away from the heated area, reduce temperature. If they seem sluggish, slightly increase heat. No data exists on diapause or hibernation requirements, so maintain consistent temperatures year-round.
Frequently Asked Questions
How difficult is Carebara xynera to keep?
Difficulty level is unknown, this species has no documented captive breeding history. It is recommended only for experienced antkeepers willing to experiment and document their findings. There is no established care protocol.
What do Carebara xynera ants eat?
Diet is unconfirmed for this species. Based on related Carebara species, they likely accept small live prey and sugar sources. Start with tiny live prey and sugar water, then adjust based on what workers accept.
What temperature do Carebara xynera ants need?
Temperature requirements are unconfirmed. Based on their montane rainforest habitat, start around 24-28°C and observe colony behavior. Adjust based on how the colony responds.
How big do Carebara xynera colonies get?
Maximum colony size is unknown, no colony size data exists in scientific literature for this species.
Do Carebara xynera ants sting?
Sting capability is not documented. Given their very small size, any sting would likely be negligible to humans. Most Myrmicinae ants can sting but many are too small to penetrate human skin.
Can I keep multiple Carebara xynera queens together?
Colony structure is unconfirmed. The number of queens in wild colonies has not been documented, and combining unrelated queens of this species has not been studied. Not recommended based on lack of data.
How long does it take for Carebara xynera eggs to become workers?
Development timeline is unknown, no direct data exists for this species.
What size are Carebara xynera workers?
Major workers are approximately 3-4mm, minor workers are approximately 1-2mm, inferred from genus measurements [1].
Where is Carebara xynera found?
This species is native to Central and East Africa: Cameroon, Central African Republic, Gabon, Kenya, Tanzania, Uganda, and Rwanda. They live in rainforest, montane wet forest, and evergreen forest at elevations from 110-2045m [1][3].
Are Carebara xynera ants aggressive?
Temperament is unstudied. Based on genus patterns, they are likely relatively peaceful and not particularly aggressive. Their tiny size suggests they are more likely to flee than to attack.
Do Carebara xynera need hibernation?
Diapause requirements are unknown. No seasonal data exists for this species. Maintain consistent temperatures year-round until you observe natural seasonal behavior.
What makes Carebara xynera different from other Carebara species?
Major workers have distinctive small horns at the posterolateral corners of the head, a diagnostic feature not found in similar species like Carebara nicotianae. They also have an extensive elevation range spanning from lowland rainforest to montane forest [1].
Report an Issue
The current care sheet is based fully on literature. See inconsistencies, or something that's incorrect? Please , it will be resolved after review from an admin. Contributing to the blogs tab also helps providing information, to make us be able to further improve the caresheets. Thank you for your support!
References
This caresheet is licensed under CC BY-SA 4.0 .
Community Blogs
No specimens available
We couldn't find any AntWeb specimens for Carebara xynera in our database.
Literature
Loading distribution map...Loading products...